For most people, the issue of how to restring a compound bow is usually left to a professional. However, a professional may not always be at hand when you need him. For instance, if you are out in the woods, a professional may not be available.

In such a case, your trip would have to be cut short. The guide will help you learn how to do bow stringing on your own. As a result, you can be self-reliant out in the bush at any time. You could also cut down the cost of having to run to a professional each time you have a simple problem.

Understanding Compound Bow Parts and Terms

Before you begin to restring your compound bow, you should have some knowledge about the parts. It will help you get through the process with ease.

  • Riser: It is the bow’s chassis. Everything else is built around this core feature. The riser should be light but not flexible.
  • Limbs: It is the part of the bow, which stores energy when you draw the string.
  • Cams: Cams are the spinning parts of the bow. A compound bow can have, one, two or hybrid cams. Two cams are harder to pull than the hybrid or single cams. However, they are faster.
  • Bowstring: It is a string made of space age materials. You pull it on the back to launch the arrow.
  • Brace Height: It is how far the string is from the grip when the string is at rest. Shorter brace heights are crucial for giving the arrow more power.

However, they are also unforgiving in terms of errors the shooter can make.

Signs that You Need to Restring You Compound Bow

Bowstringing should not only be done when the bowstring snaps. Firstly, that is quite dangerous; it could injure you or anyone nearby when it snaps. Secondly, you performance will not be optimal.

Additionally, there is a chance that the compound bow could be damaged. Regular inspections will help keep your shooting game at the highest level. Here are a number of indications you should keep in mind.

Tip 1: Watch Out for Fraying

Carefully go over the length of the bowstring in clear light conditions. If you wear glasses, make sure you have them on for the inspection. Ideally, you should see tiny springs detached from the surface if the bowstring needs replacing.

Tip 2: Inspect the Cams More Often

The points where the string interacts with the bow’s cam is the area most fraying occurs. Ideally, if you are out hunting, check this area each morning before going out. If you notice any wear, replace it immediately.

Tip 3: Examine the Nock Point

The nock point is also prone to fraying. Check it closely for any signs of loose strings and replace the string if you notice any of them is loose.

Tip 4: Carefully Watch the Draw Length

One of the major indications to spot is the draw length. If you see it has gotten significantly longer with time, you need to change the string.

How to Restring the Compound Bow

An archery shop is probably the greatest place to restring the bow. However, the reason for this is that they have many tools. These are tools you may not afford or are not near you when you need them.

Most people believe that a bow press is the only way to replace a broken or damaged string. However, this is not true. You can replace the string quite easily, especially if you have been around compound bows for a while.

Requirements

  • An Allen Wrench
  • Both your feet and hands
  • A new bowstring

9 steps to restring your bow with ease

Step 1:

Find the location of the limb bolts on the compound bow. Insert you Allen wrench inside and begin turning. The riser is connected to the limbs of your bow at these limb bolts. Turn the bolts anti-clockwise at least thrice. As a result, it will help to release the pressure from the limbs.

Step 2:

Place both your feet on the bowstring. Pull the riser with both hands until you feel the compound bow has been fully drawn.

Step 3:

Keep one hand on the riser. Use your other hand to pace the end loops of the new string on the teardrop fittings of its open sides. Teardrop fittings are located on both sides of the bow’s cable.

Step 4:

Lower your compound bow slowly until both limbs are in the original position.

Step 5:

Look at the bowstrings loops carefully. Ideally, you should have a diagram of an assembled compound bow to compare. Ensure that they are placed correctly in the grooves. It is essential that they be in the correct position at all times.

Step 6:

Use both of your feet and step on the newly installed string. Pull the bow upwards with your feet until it is fully extended.

Step 7:

Remove the worn out bowstring slowly, taking care not to injure your hands. Lower the compound bow into a resting position.

Step 8:

Take the Allen wrench and tight the bolts once again. Twist the bolts at least thrice. Ensure that you apply a bit of pressure on the last twist to keep them tightly secured in place.

Step 9:

Take the bow out to a test range and try it out. If possible, only extend it slightly on the first try. The bow should work as usual. In addition, you should notice an improvement in your shots.

Gradually increase the length of your draw until the bow is fully extended. It will help you to assess if there is anything wrong with the work you did. Never take it out hunting before you have fully tested it.

These are the simplest steps in bow restringing. It can easily be restringed from your home even when you do not own a bow press. With enough care, it will be as though you have a professional repair shop in your home.

More information on how to Restring the Compound Bow can be found from the links below:

Tips to Improving Your Skill

Restringing will make your bow more accurate and easier to maneuver. However, there are other tips that can make it easier for you to hit targets accurately.

#1: Weigh Training

Using a compound bow lessens the amount of effort you use to shoot than in a traditional bow. However, you still have to be physically fit to make accurate shots. Ideally, do some weight lifting so that the bow feels lighter in your hands.

#2: Buy a Range Finder

It is of particular importance for neophytes. It helps you to estimate the range of the target while accounting for elevation.

Conclusion

Knowing how to restring a compound bow will save you a lot of time and money. In addition, it can help boost your confidence about taking only your bow on a hunting trip.

The guide contains many useful tips and tricks that will prove useful to you as a compound bow enthusiast. Unlike the traditional bow, this bow offers you ease of use.

In addition, the compound bow comes with numerous accessories. If you are just getting started, find out more about them. They are designed to make the experience more fun.